Bedsore Prevention Air Mattress with Air Pump (wp01-07)

• Customization: Available
• Type: Bedsore Mat
• Group: Middle-aged and Old
• Model NO.: wp01-07
• Certification: CE
• Work Mode: Continuous Wave
• Power: Less Than 10W
• Pressure Range: More Than 16kpa
• Air Output: More Than 8L/Min
• Cycle Time: 5-6 Minutes
• Sample: Yes
• Transport Package: Box
• Specification: CE, ISO13485
• Trademark: winport
• Origin: Shandong
• HS Code: 90189090
• Production Capacity: 10000PCS/Month

Product Description

Main Structure 

The medical air cushion ("air cushion" for short) is made of rubber or rubber plus plastic materials.

Performance

1.The nozzle of the air cushion should be fixed tightly and without air leak.
2.The air cushion should not leak when the pressure is of 10.6Kpa.

Application

This product is used for the patient lying in bed for a long time or the paralytic patient to support
his body and avoid the bedsore.

Applicability

This product is suitable for the patient lying in bed for a long time or the paralytic patient to support
his body and avoid the bedsore.

Usage method

1.Pull out the cover first when to fill it with air.Charge the air into it by put air-filling pipe right at the
mouth of bicycle pump.The pressure of air-filled can't exceed 10.6Kpa (If you feel it a little soft, it's all right.)

2.After filling air, press the mouth of bicycle pump toward the inside of the cushion with your thrumb
making the outside smooth.When bleed the air, block the bottom of the mouth with your thrumb and forefinger and then put forth the air strength slightly.

Attention

1.The air cushion can only used for the patient, and can't be used under the water.
2.Keep it away from acid, alkali,organic solvent or heat source avoiding direct sunshine.Don't touch it with sharp things to avoid leaking air and affect use.
3.The pressure of outside can't be over than 100kg when use it .
4.Clean it's surface with cloth soaked with a little washing powder ,wipe it slightly.Prohibit to wash it with petrol and other chemical solvent etc.

Storage

Store the air cushion in the room of cooling, the relative humidity should not more than 80%, no corrosive gas,and well airy. 

Work mode	Continuous Wave
Voltage	AC220/110V 50/60HZ
Power	≤10W
Pressure range	≥16kPA
Air output	≥8L/min
Cycle time	5~6minutes